Product review· Cordless Tools
DeWalt DCD796 combi drill review: specs, kits and alternatives
The DeWalt DCD796 18V XR brushless combi drill explained: 70 Nm, 0–2,000 rpm, 15 torque settings and what each kit code includes.
- HotWhatHow editorial team
- Published
- Last reviewed
- 5 min read
The DeWalt DCD796 is one of the most widely sold 18V combi drills in the UK, stocked by trade merchants and DIY retailers alike. It is our best overall pick in the best cordless combi drills roundup. This review covers what the DCD796 is, what its specifications mean, its strengths and weaknesses compared with rivals, and who it suits. It is based on DeWalt's product page and UK retailer listings; we have not used the drill ourselves, so the assessment is on paper.
AI-assisted summary based on specifications and retailer data
DeWalt DCD796 18V XR Brushless Compact Combi Drill
DeWalt · Model DCD796 (kits: DCD796P1-GB, DCD796P2-GB, DCD796M1, DCD796D2)
Best for: Keen DIYers and light trade users who want a compact brushless drill on a widely stocked battery platform
A compact brushless 18V XR combi drill with 70 Nm of maximum (hard) torque, 27 Nm in drill mode, two speeds (0–550 / 0–2,000 rpm), a 13 mm keyless chuck, 15 torque settings and a hammer rate of up to 34,000 bpm. DeWalt's Irish site lists the bare tool at 1.2 kg.
AI-assisted summary based on specifications and retailer data
Pros
- 70 Nm in a compact body
- Two speeds up to 2,000 rpm
- 15 torque settings
- Sold bare or in several kits on the 18V XR platform
Cons
- Less torque than the Ryobi RPD18X1 (105 Nm) and Milwaukee M18 FPD3 (158 Nm)
- Many kit codes with different batteries
- Two-battery kits cost much more than single-battery kits
Key specs
| Voltage / motor | 18V XR, brushless |
|---|---|
| Max torque | 70 Nm hard / 27 Nm (drill-mode figure) |
| No-load speed | 0–550 / 0–2,000 rpm |
| Impact rate | Up to 34,000 bpm |
| Power output | 460 W |
| Chuck | 13 mm keyless |
| Torque settings | 15 |
| Steel drilling capacity | 13 mm |
| Weight | 1.2 kg bare (DeWalt); 1.6–1.8 kg with battery (UK retailers) |
Specs checked — see sources below.
Typical price £140 (1 × 5.0Ah kit) (checked ; prices change — check the retailer)
- View at Toolstation(opens in a new tab)
- View at Cromwell(opens in a new tab)
- View at Tooled-Up(opens in a new tab)
We may earn a commission from some links — it never changes our picks. How we make money
What it is
The DCD796 is a compact brushless combi drill in DeWalt's 18V XR range. "Combi" means it combines drilling, screwdriving and a hammer action for masonry. DeWalt sells it under several codes depending on what is in the box: DCD796N is the bare tool, DCD796P1 comes with one 5.0Ah battery, DCD796P2 with two 5.0Ah batteries, and DCD796M1 and DCD796D2 with 4.0Ah and 2.0Ah batteries respectively. Some listings refer to a second-generation "G2" version.
Prices vary a lot by kit. Tooled-Up listed the 1 × 5.0Ah kit at £139.99 inc VAT when we checked; two-battery kits cost considerably more.
Key specs explained
70 Nm torque
Retailers list a maximum torque of 70 Nm, with some spec sheets giving the pair as 27/70 Nm. The higher number is the maximum "hard" torque — the figure manufacturers usually headline — and the lower number reflects a different measurement. For context, 70 Nm is comfortably more than most home DIY jobs need and sits in the upper middle of our roundup: above the Makita DHP485, Einhell TE-CD 18/50 and Bosch GSB 18V-55, and below the Ryobi RPD18X1 and Milwaukee M18 FPD3.
Two speeds: 0–550 and 0–2,000 rpm
The low gear gives control and torque for screwdriving and larger holes; the high gear spins up to 2,000 rpm for fast drilling of small holes. 2,000 rpm is at the top of the range for the drills we compared.
Hammer action up to 34,000 bpm
The hammer mode delivers up to 34,000 blows per minute, which is what lets the drill bore into brick and block with a masonry bit. Toolstop's listing notes masonry drilling up to 13 mm.
15 torque settings
The clutch has 15 positions. Lower settings slip earlier, helping you avoid overdriving small screws; higher settings allow bigger screws into harder materials. Some rivals offer more settings — the Bosch GSB 18V-55 lists 20 and the Einhell 22 — but 15 covers most jobs.
Compact, brushless body
DeWalt describes the DCD796 as compact and lightweight. Its Irish product page lists 1.2 kg for the tool, and UK retailers list 1.6–1.8 kg with a battery fitted, depending on battery size. The brushless motor is generally more efficient than a brushed design and has fewer wearing parts.
13 mm keyless chuck
A 13 mm keyless chuck takes standard drill bits and screwdriver bit holders and can be tightened by hand.
Strengths on paper
- Balanced spec. 70 Nm, 2,000 rpm and a hammer action in a compact body suit a wide range of jobs.
- Platform. DeWalt's 18V XR batteries are widely stocked in the UK and fit a large range of tools.
- Flexible buying. Available bare or in single- and two-battery kits.
- Availability. Stocked by trade merchants such as Toolstation and Cromwell as well as specialist tool shops.
Weaknesses on paper
- Not the most powerful. The Ryobi RPD18X1 lists 105 Nm and the Milwaukee M18 FPD3 158 Nm.
- Kit confusion. Many codes with different batteries make price comparisons tricky. Always check the battery capacity and count.
- Price of two-battery kits. Two 5.0Ah batteries add significantly to the cost.
- Fewer clutch settings than some rivals. 15, against 20 on the Bosch and 22 on the Einhell.
Who it suits
The DCD796 suits keen DIYers who do a range of jobs — shelves, fencing, decking, kitchen fitting — and want a drill they will not outgrow. It also suits light trade users who want a compact drill alongside a more powerful one, and anyone who expects to buy more DeWalt 18V tools later.
It is less suited to occasional users who will only assemble furniture and hang the odd picture; the Einhell kit is much cheaper. It is also less suited to heavy drilling of large holes in hardwood or masonry, where the Milwaukee's extra torque is useful — or where an SDS drill is a better tool altogether.
Alternatives
From our best cordless combi drills roundup:
- Makita DHP485 — lighter at about 1.1 kg bare, cheap as a body-only tool, but 50 Nm.
- Bosch Professional GSB 18V-55 — 55 Nm with 20 torque settings and an all-metal Röhm chuck.
- Milwaukee M18 FUEL FPD3 — 158 Nm for heavy jobs, but heavier at 2.2 kg with a battery.
- Ryobi RPD18X1 — 105 Nm on Ryobi's ONE+ platform, sold bare in the UK.
- Einhell TE-CD 18/50 Li-i BL — a budget brushless kit with batteries and a charger.
Our cordless drill buying guide explains torque, clutches and battery platforms in more depth.
FAQ
What do the DCD796 kit codes mean?
The suffix shows what comes in the box. N is bare (no battery or charger), P1 includes one 5.0Ah battery, P2 includes two 5.0Ah batteries, M1 one 4.0Ah battery and D2 two 2.0Ah batteries. Check each listing to confirm the charger and case.
How much torque does the DCD796 have?
Retailers list a maximum of 70 Nm, with some spec sheets also giving 27 Nm as a second figure.
Can the DCD796 drill into brick?
Yes. Its hammer mode delivers up to 34,000 blows per minute, and listings note masonry drilling up to 13 mm with a suitable masonry bit.
How heavy is the DeWalt DCD796?
DeWalt's Irish product page lists the tool at 1.2 kg. UK retailers list 1.6–1.8 kg with a battery fitted.
Will older DeWalt 18V XR batteries fit?
The DCD796 is part of DeWalt's 18V XR range and is sold with XR batteries. Check DeWalt's compatibility information for specific older battery models.
Written by the HotWhatHow editorial team with AI assistance, from manufacturer specifications and retailer listings. We have not tested these products hands-on and we never publish star ratings or invented review counts. Spotted a mistake? Tell us — we list fixes on our corrections page.
